Accessories

Features

Features

infiNET
Crestron's groundbreaking infiNET wireless technology affords reliable 2-way communications throughout a home or office structure without the need for physical control wiring. Numerous infiNET switches, dimmers, and other devices can be linked to the control system via a single RF gateway. Employing a 2.4 GHz mesh network topology, every infiNET device functions as an RF repeater, increasing effective range and reinforcing the complete network by providing multiple redundant signal paths within the mesh network.

Lighting and Keypad Control
By default, the CLW-SWS4RF's top left pushbutton provides the on/off operation to control a range of lighting or fan loads. An adjustable turn-off delay allows the user time to exit the room before the lights shut off. All four pushbuttons are software programmable for any Crestron system function, enabling control of additional lighting circuits, fans, drapes, audio levels, etc. right from a single CLW-SWS4RF.

A slide switch is also provided to select between RUN, SET, and OFF modes. RUN is the normal operating mode as described above. SET mode is used for setting the delay time, while switching to the OFF mode completely disables the light switch and disconnects all power to the load to facilitate changing bulbs.

The status LED serves a dual purpose, providing helpful status confirmation during operation and setup, and glowing dimly when idle to make the switch easy to locate in the dark.

Multipoint Switching
Multipoint switching is enabled using one CLW-SWS4RF master switch along with one or more CLW-SLVS1RF slave switches. Multipoint switching is similar to conventional 3-way or 4-way switching, allowing control of a single load from multiple locations in the room.

Automation System Integration
Connecting the CLW-SWS4RF to a control system enables its keypad functionality as described above, and also allows its local switching functions to be controlled from other keypads, touchpanels, wireless remotes, and computers to support unlimited flexibility for remote control and integration with other devices and systems. In the event that communication with the control system is disrupted for any reason, the CLW-SWS4RF will remain operable to control the local lighting circuit.

Easy Installation
System design, installation, and upgrade using infiNET switches could not be easier. Since there's no control wire required, the CLW-SWS4RF can be installed just like any conventional light switch. Multiple units may be ganged side-by-side along with other switches, dimmers and non-Crestron devices. (Note: Ganging the CLW-SWS4RF typically requires the removal of the side heat sink fin on one or both sides of the unit resulting in a derating of its load capacity; see specifications below.)

Setting up a complete network of infiNET devices is simple, utilizing dynamic discovery (self-install) to locate and acquire each RF device automatically. Setting the RF ID of each device employs the same convention as Crestron's familiar TSID method, and each device is programmable using Crestron SIMPLWindows, SystemBuilder or D3Pro software just like any wired Cresnet device. Even firmware updates are performed over the wireless network.

No further action is required to configure the infiNET network. Each device assigned to a common gateway automatically behaves as a repeater for any other devices within range (approximately 150 feet indoors), and additional repeaters may be added if necessary. At all times, the infiNET gateway monitors each device on the network, ignoring any other 2.4 GHz signals, and reconfiguring the entire network automatically in response to new sources of interference and other changes in RF conditions.

Color Options
infiNET Switches and Dimmers are available in white, black, or almond, with or without custom button engraving. Complete installation requires a Decora style faceplate (not included).

Key Features

• Decorative Wall Mount Switch and Keypad
• Multipoint Switching Capability
• Crestron System Integration via infiNET Wireless Network
• On/Off Control of Incandescent, Fluorescent, Neon, Cold Cathode, Magnetic or Electronic Low-Voltage, HID, and Fan Loads
• Programmable Keypad Buttons for Control of Other Devices
• Adjustable Turn-off Time Delay
• Dimmer Version Also Available

Specifications

Item Includes

FAQ's

1. Can I Come to Your Store To Pick Up My Order ?
AValive maintains a nationwide shipping network in conjunction with their vendors. The main warehouse for AValive is located in NC . In order to keep prices low and not charge sales tax outside of NC we unfortunately can not have pick-ups at any of our service locations. We can however arrange for next day delivery including Saturday in most cases.

2. What is your return policy-Terms and Conditions ?
AValive like many retailers are being forced with open box restocking fees from the manufactures we represent. Therefore we reserve the right to charge 25% in restocking fees and no refund of shipping charges. Software can not be returned for any reason nor warranties and training materials. AValive will often assist in a product exchange with in the 14-day period from your transaction if you wrongly ordered such product and need to exchange it for the correct part. No returns can happen with out a RMA number from AValive with in 14 days the product being shipped from us.

AValive Terms & Conditions:

1. By submitting this order for processing, you are agreeing that you have reviewed the order, it is correct, and that you fully intend to purchase the items contained in your shopping cart.
2. All product warranties will be honored by the original manufacturer. Should your product require warranty service or replacement contact the manufacturer immediately. A minimum service fee plus any applicable shipping and handling costs will apply should you desire the assistance of AValive in any warranty claim.
3. Once you have purchased and received the items, they may only be returned after receiving an express written email authorization from AValive. No returns will be accepted unless prior approval is received. Please email customer service regarding your return.
4. Please be advised that all returns will be subject to a 25% restocking fee plus applicable shipping cost.
5. Opened software may not be returned under any circumstances.
6. AValive/Triangle Visual Interactive makes every effort to ensure that the information on this web site, including but not limited to product pricing, availability, and details, is complete and accurate. However, due to rapidly changing conditions with our suppliers, we cannot guarantee the accuracy of the information contained herein. AValive/Triangle Visual Interactive reserves the right to modify or change any information without prior notice to you, as well as limit the quantity of any product purchased. In the event that an order is placed and information about any item in the order is incorrect, AValive/Triangle Visual Interactive will notify you about the inaccuracy, and will only process the order pending your approval. However, we also reserve the right to refuse or cancel the order at our discretion. We apologize for any inconvenience this may cause you.

3. What Time Is Shipping Cut Off ?
Most orders placed before 3PM EST can be shipped expedited same day using Fed Ex or UPS Express Services. If the product is shipped out of our west coast distribution warehouses. We can often execute the order as late as 4 pm EST. Please note we make every effort to ship ASAP on all orders but certain manufactures require a 1-2 day lead time.

4. When Do You Charge My Card ?
AValive never charges your card until we confirm the product you ordered is shippable or pre-ordered and all costs have been communicated to you. So if you get a message saying shipping not calculated you can be assured that someone from AValive will either email or call you with an exact total before we process your order.

5. When I place my order is my card automatically charged ?
No: AValive processes each order manually to guarantee accuracy and availability . Your card is never charged by an automated cart system.

6. Who Pays Customs Charges and Tarrifs if I Am An International Order ?
It is very important to consider the effects of tariffs, taxes, port handling fees and other miscellaneous customs charges when determining your product's final cost. Depending on your product and country of destination, customs charges will affect the price you the buyer is willing to pay for your product. The importer (buyer) is responsible for paying these charges and Avalive will not be responsible for this .

7. Why does the product price say 'Click for best price'?
Often times manufacturers do not want any price other than MAP or Minimum Advertised Price to be listed in any form of e-commerce or advertising. Because AValive believes in the American Way we feel we should determine what price you pay not someone else.

8. Will I Pay Sales Tax ?
All orders shipped to NC will be charged NC Sales Tax unless you are a reseller which will require a NC Dept Of Revenue Exemption Form to be faxed to us. Most all other states we ship to will not b charged sales tax with the only exception being some direct ship from warehouses located in the state to which the product s shipped to.