Accessories

Features

In addition to the local inputs, there are two QuickMedia (QM) input ports which receive RGB, video, program audio and mic signals from FlipTop or Wall Plate transmitters over inexpensive CAT5e type cable* via Crestron's exclusive QuickMedia transport.

The 7X2 video and audio switchers built into the QM-MD7X2 allow any of the local or QM input signals to be routed independently to either of two QM outputs. Each QM output can be used to feed a separate QuickMedia Receiver to support two independent display devices.

Additionally, two gated microphone inputs are included on the QM-MD7X2 with software switchable 48V phantom power at both inputs to support either dynamic or condenser microphones. Balanced or unbalanced line-level sources such as wireless microphones can also be accommodated. These two microphone/line inputs can be mixed with the two mic signals brought in at either QM input, with two independent 4X1 mixes possible to feed each of the two QM outputs. Each mix also includes independent 4-band speech-optimized graphic equalization for each individual microphone input.

Also key to the QM-MD7X2 is its two sets of local audio outputs, each consisting of a stereo program channel and a mono speech channel. These six balanced/unbalanced line-level outputs are designed to drive rack-mounted amplifiers like the QM-AMP3X80, as well as codecs, recorders, assistive listening devices, and more. Generally, Audio Output 1 contains the same stereo program signal and microphone mix as that fed to QM Output 1, and likewise for Output 2. However, the mix of left program, right program, and microphones is independently adjustable for each local output channel.

Each local output channel includes adjustments for volume, bass, and treble, a mute control, plus ten-band graphic equalization and 2-band parametric equalization. In addition, the speech outputs include up to 40mS of delay adjustment for loudspeaker alignment. With such extensive control over the system's audio performance, the QM-MD7X2 effectively eliminates the need for expensive outboard processors to attain precise adjustment tailored to the acoustical environment. All audio processing and mixing is performed in the digital domain, adjustable at setup using Crestron's QM Tools software (part of Crestron Toolbox). Many parameters are also controllable in real-time from a keypad or touchpanel, with numerous presets that can be saved for instant recall to account for varying source material or room conditions.

To gain additional signal routing flexibility and expand input and output capacity, up to two QuickMedia Distribution Centers, Distribution Amplifiers, and Matrix Switchers may be cascaded in a given QuickMedia signal path*. For instance, a QM-MD8X8 or QM-MD4X2 may be used to expand the input capacity of the QM-MD7X2. Complete system operation can be made transparent to the end-user with all signal routing occurring smoothly under the command of the MediaManager control system. Built-in video-sensing on every input can be utilized to trigger automatic input selection and provide power status information to the control system.

Control and monitoring of the QM-MD7X2 is also possible independent of the control system using its front panel pushbuttons and LEDs. Customizable label strips are provided to easily designate inputs and outputs by name using Crestron Engraver software or standard 3/8" tape labels. For security, the front panel controls can be locked out.

Key Features

• Versatile matrix switcher and audio processor
• 3 video, S-Video, or component inputs
• 2 RGB inputs | 1 RGB monitor pass-thru
• 5 stereo audio inputs | 2 gated microphone inputs
• 2 QuickMedia inputs | 2 QuickMedia outputs
• 2 audio outputs w/discrete stereo program and speech channels
• Graphic and parametric equalization
• Versatile input mixing and microphone EQ
• Up to 40ms speech delay
• Front panel controls | Single-space rack-mountable

Specifications

Item Includes

FAQ's

1. Can I Come to Your Store To Pick Up My Order ?
AValive maintains a nationwide shipping network in conjunction with their vendors. The main warehouse for AValive is located in NC . In order to keep prices low and not charge sales tax outside of NC we unfortunately can not have pick-ups at any of our service locations. We can however arrange for next day delivery including Saturday in most cases.

2. What is your return policy-Terms and Conditions ?
AValive like many retailers are being forced with open box restocking fees from the manufactures we represent. Therefore we reserve the right to charge 25% in restocking fees and no refund of shipping charges. Software can not be returned for any reason nor warranties and training materials. AValive will often assist in a product exchange with in the 14-day period from your transaction if you wrongly ordered such product and need to exchange it for the correct part. No returns can happen with out a RMA number from AValive with in 14 days the product being shipped from us.

AValive Terms & Conditions:

1. By submitting this order for processing, you are agreeing that you have reviewed the order, it is correct, and that you fully intend to purchase the items contained in your shopping cart.
2. All product warranties will be honored by the original manufacturer. Should your product require warranty service or replacement contact the manufacturer immediately. A minimum service fee plus any applicable shipping and handling costs will apply should you desire the assistance of AValive in any warranty claim.
3. Once you have purchased and received the items, they may only be returned after receiving an express written email authorization from AValive. No returns will be accepted unless prior approval is received. Please email customer service regarding your return.
4. Please be advised that all returns will be subject to a 25% restocking fee plus applicable shipping cost.
5. Opened software may not be returned under any circumstances.
6. AValive/Triangle Visual Interactive makes every effort to ensure that the information on this web site, including but not limited to product pricing, availability, and details, is complete and accurate. However, due to rapidly changing conditions with our suppliers, we cannot guarantee the accuracy of the information contained herein. AValive/Triangle Visual Interactive reserves the right to modify or change any information without prior notice to you, as well as limit the quantity of any product purchased. In the event that an order is placed and information about any item in the order is incorrect, AValive/Triangle Visual Interactive will notify you about the inaccuracy, and will only process the order pending your approval. However, we also reserve the right to refuse or cancel the order at our discretion. We apologize for any inconvenience this may cause you.

3. What Time Is Shipping Cut Off ?
Most orders placed before 3PM EST can be shipped expedited same day using Fed Ex or UPS Express Services. If the product is shipped out of our west coast distribution warehouses. We can often execute the order as late as 4 pm EST. Please note we make every effort to ship ASAP on all orders but certain manufactures require a 1-2 day lead time.

4. When Do You Charge My Card ?
AValive never charges your card until we confirm the product you ordered is shippable or pre-ordered and all costs have been communicated to you. So if you get a message saying shipping not calculated you can be assured that someone from AValive will either email or call you with an exact total before we process your order.

5. When I place my order is my card automatically charged ?
No: AValive processes each order manually to guarantee accuracy and availability . Your card is never charged by an automated cart system.

6. Who Pays Customs Charges and Tarrifs if I Am An International Order ?
It is very important to consider the effects of tariffs, taxes, port handling fees and other miscellaneous customs charges when determining your product's final cost. Depending on your product and country of destination, customs charges will affect the price you the buyer is willing to pay for your product. The importer (buyer) is responsible for paying these charges and Avalive will not be responsible for this .

7. Why does the product price say 'Click for best price'?
Often times manufacturers do not want any price other than MAP or Minimum Advertised Price to be listed in any form of e-commerce or advertising. Because AValive believes in the American Way we feel we should determine what price you pay not someone else.

8. Will I Pay Sales Tax ?
All orders shipped to NC will be charged NC Sales Tax unless you are a reseller which will require a NC Dept Of Revenue Exemption Form to be faxed to us. Most all other states we ship to will not b charged sales tax with the only exception being some direct ship from warehouses located in the state to which the product s shipped to.